Shower Upgrade 101 - Top Tips For New Unit Installation

Call Today

We've unearthed this article pertaining to How to Install a Shower Enclosure down the page on the web and figured it made good sense to relate it with you here.

A successful shower installation requires careful planning and a lot of work. For the most part, you will certainly require to do 3 sorts of tasks: framing walls, setting up the plumbing, and also ending up walls.

Different Types of Shower Units

Push-on Mixer: The hose pipe as well as spray parts of the push-on mixer shower system can be attached to the bathroom faucet based on your requirement, and the water temperature can be changed by means of the taps. Push-on mixers are cheap as well as very basic to set up. Nevertheless, although the pipe connection is simple, it is conveniently displaced. Additionally, it is bothersome to readjust the temperature level.

Bath/Shower Mixer: The pipe as well as spray of this kind of shower are integrated with a bathroom mixer faucet, as well as the temperature level can be changed with the bath taps. It is an extremely low-cost choice as well as no additional plumbing is involved. However, the bath/shower mixers likewise experience troublesome temperature level control alternatives.

Guidebook Mixer: The pipe as well as spray of a hands-on mixer shower system are a part of the wall device and also the cold and hot water materials are linked to a single valve The temperature level and also stress of the water are managed through either one or a variety of handles (in a lot more costly showers). Although temperature control is much easier in hands-on mixer types, they are much more costly than the previously mentioned mixers. They additionally need additional plumbing of cold and hot water pipelines.

Thermostatic Mixer: The hose pipe and spray of this shower kind are a part of the wall device as well as the hot and cold water supplies are attached to a single valve below as well. It is complete with an integrated stabiliser to self-adjust the water temperature and to avoid it from becoming also hot. Among the greatest advantages of a thermostatic mixer shower kind includes convenient temperature level control. However, it is one of the most costly of the various mixer choices.

Power Shower: A power shower is a single device including a powerful electrical pump that is capable of modifying both the water pressure and also temperature. This type of shower can be fitted if there is water system from a cold water cistern and also a warm water cylinder. A power shower makes the modification of both pressure and also temperature very easy. On the other hand, it is unsuitable for water warmed directly by the shower or where the water is provided by a combination central heating boiler under mains stress.

Electric Shower: An electric shower is plumbed right into a mains cold water supply and also it heats the water electrically. It is necessary to note that for this shower kind to be installed, the keys pressure requires to be at least 0.7 kg/sq centimeters (10lb/sq in). The unit enables the temperature as well as stress to be changed using a knob. Versions with temperature level stabilisers are better as they stay untouched by other faucets elsewhere being used within the household. A major downside of electric showers is that the control knob just allows for the choice of heats at less stress, or reduced temperatures at a higher stress. This is problematic in the winter season when the spray is typically weak and also the mains water is colder. Nevertheless, this trouble is taken on in some models which are offered with a winter/summer setup.

The Majority Of Common Errors

Going against or ignoring regional code limitations.

Making use of pipes that are too little.

Connecting copper to galvanized without making use of a brass or dielectric fitting between the two.

Not utilizing tape or pipeline substance at threaded joints.

Not leveling your fixtures when installing them.

Not setting up an air void loading for fixtures.

Cutting supply stub outs also short to install the shutoff valves onto after the completed wall surface remains in area.

Not effectively straightening tubes right into installations or quit shutoffs. (Compeling the nut onto the compression ring at an angle when the tubes is at an angle will cause a leak.).

When turning the water back on in your home, always run the outside pipe shutoff or purge your toilets to bleed dirt as well as air from the lines. This debris can trigger issues in your sink taps as well as various other plumbing trim.

Prep work.

First of all, you must choose the kind of shower that you want to set up. It is important to ascertain whether the chosen shower is capable of coping with certain systems and can regulate a safe degree of water via the central heating boiler. A lot of shower systems nowadays are made to be adaptable to different water pressures (such as stored warm water as well as chilly mains).
It is additionally crucial to take into consideration the water pressure and the preparation of the piping and water drainage for the shower.

Technique.

Relying on the type of shower you desire to set up, the shower head must either be suited order to avoid its contact with the water in the bathroom below or the base tray, or it has to have a check shutoff.
Before starting, it is suggested to mark the placements of the shower head as well as control, and to intend the pipe-work included. Additionally, the drain system to remove the drainage will certainly need to be intended. Both settings of the cable course as well as the shower button will additionally need to be considered if a rapid or electric shower device is being set up.
Use the guideline overview offered with the shower device to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is necessary to cut off the water. In order to safeguard the pipelines, they ought to be offered a water resistant covering as well as also fitted with separating shutoffs. The pipes can after that be buried into the wall surface and smudged over to neaten the overall appearance.
Fit the base tray, shower head, as well as fittings.
Attach the main shower control to the pipelines that will be supplying the water (This might call for a female screw string adapter).
Reconnect the water supply as well as examination the pipes for any type of leakages, as some may require tightening.
If you are setting up an electrical shower, bear in mind to switch off the power supply before making any electrical links. As soon as these connections have been made (there must be guidance within the instruction manual), the power supply can be switched over back on.

Adjusting Water Pressure to Match Your Shower.

The cold water storage tank can be raised to a greater height (in some cases just 150mm (6inches)) by fitting a strong wood assistance beneath it - potentially made up of struts and also blockboards. If you choose this choice, the primary and also distribution pipelines will certainly also have to be increased to satisfy the brand-new elevation of the reservoir.
Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is selected, it needs to be attached right into the power supply in order to run.

Piping and Drainage.

It is best to use 15mm diameter supply pipes, as well as make the go to the shower as brief and also straight as feasible so as to maintain maximum pressure and minimise warm loss. Furthermore, by minimising using arm joints for pipeline edges, you can lower the resistance in the circulation of the water supply. You can attain this by bending the pipelines instead.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

As a devoted person who reads on How to Build a Shower Enclosure for Your DIY Bathroom, I thought sharing that post was a great idea. Please set aside a second to share this blog entry if you liked it. I enjoy reading our article about Simple ways to Install a Shower Cubicle on Your Own.

Click For More Info